DIY Heated DryBox for 3D Printing filament - under $20 & MasterSpool Update

In this Video I'm showing you how to make a simple heated dry-box for your 3D printing filament that you can use whilst 3D Printing.

The start of the video also has an update on the MasterSpool project - if you want to skip that just to 4:42

With just a few basic items from eBay (or similar) and some 3D design files to print (links below) - you can make a drybox for both storage and in use while 3D printing.

My Blog post for this project is here - https://richrap.blogspot.co.uk/2018/02/diy-heated-drybox-for-3d-printing.html

Files for the Heated Dry-Box project are on Youmagine Here -
https://www.youmagine.com/designs/heated-filament-dry-box-v1-for-3d-printing-materials

And also Thingiverse - https://www.thingiverse.com/thing:2778707

Masterspool files are on Youmagine - https://www.youmagine.com/designs/masterspool-for-3d-printing-filament

And Thingiverse - https://www.thingiverse.com/thing:2769823

Intro & Outro Music -
Kindly supplied by Mark Wheadon
www.psychosoma.net