Keep your robot performing as it should. This step-by-step guide shows how to care for your Dyson Spot+Scrubᵀᴹ Ai wet and dry robot vacuum cleaner, helping it stay ready for everyday cleaning.
Simple care
Dirty water tank – release, empty, wash with warm water and detergent, then dry.
Sensors and camera – wipe sensors and camera areas using a dry, lint-free cloth.
Wet roller – remove hair and threads, rinse with detergent, squeeze out excess water, and dry for 24 hours.²
Filters and dock – rinse filters, empty dock bins and tanks, and ensure all parts are fully dry before refitting.³
Dock refresh – refill formulation and clean water tanks to the MAX marks, then wash and dry the dock ramp.¹
Ready to go further?
Explore the Dyson Spot+Scrubᵀᴹ Ai page to get the full machine details.
00:05 Robot dirty water tank.
00:31 Sensors and camera.
01:12 Wet roller.
01:54 Filters.
02:36 Dock bin and tanks.
04:05 Dock ramp.
#Dyson #RobotVacuum #WetAndDry #FloorCare #CleaningTips
Footnotes
¹ Allow a minimum of 24 hours to dry before refitting.
² Ensure the robot is switched off before removing parts.
³ Make sure all bins, tanks, and seals are completely dry before use.
Simple care
Dirty water tank – release, empty, wash with warm water and detergent, then dry.
Sensors and camera – wipe sensors and camera areas using a dry, lint-free cloth.
Wet roller – remove hair and threads, rinse with detergent, squeeze out excess water, and dry for 24 hours.²
Filters and dock – rinse filters, empty dock bins and tanks, and ensure all parts are fully dry before refitting.³
Dock refresh – refill formulation and clean water tanks to the MAX marks, then wash and dry the dock ramp.¹
Ready to go further?
Explore the Dyson Spot+Scrubᵀᴹ Ai page to get the full machine details.
00:05 Robot dirty water tank.
00:31 Sensors and camera.
01:12 Wet roller.
01:54 Filters.
02:36 Dock bin and tanks.
04:05 Dock ramp.
#Dyson #RobotVacuum #WetAndDry #FloorCare #CleaningTips
Footnotes
¹ Allow a minimum of 24 hours to dry before refitting.
² Ensure the robot is switched off before removing parts.
³ Make sure all bins, tanks, and seals are completely dry before use.
This website uses cookies
Comments 0
Be the first to comment!