In this episode of the e-dirt bike build series, I finally tackle something I’ve struggled with for years.
Instead of messing around with small printers, fiberglass molds, and glued-together puzzle pieces, I’m using the Anycubic Kobra S1 Max with the ACE 2 Pro multi-colour system to print full-scale fairing and fender mockups right here in the shop.
This machine brings a few big advantages for prototyping
Massive 350×350×350mm build volume
CoreXY design for better speed and stability
350°C hotend + heated chamber (65°C) for engineering materials
Multi-colour printing + active filament drying
AI camera monitoring with remote notifications
With that, I’m able to print full-size fairings in one piece so I can test fit everything before committing to molds and save a ton of time, material, and frustration.
I walk through
* Scaling and finishing the CAD models
* Multi-colour slicing workflow (Orca-based slicer)
* Print settings, time comparisons, and tradeoffs
* Printing + assembling the mockups
* Final test fit on the bike
Next step: turning these into vacuum-formed ABS parts for the final build.
Series (Watch From the Start)
Episode 1 – Design + Powertrain Testing
Episode 2 – Chassis Fabrication (DOM Tube + Laser Welding)
Episode 3 – 2-Stage Transmission + CNC Sprockets
Equipment Used
Anycubic Kobra S1 Max & ACE 2 Pro Multi-Colour System
S1MAX Link
Code:3DPRINTING20
#anycubic #anycubickobrasimaxcombo #s1maxcombo
@ANYCUBIC3D
Golden Motor Products Featured
HPM 10kW Dual Stator PMSM Motor
EZ-B72800 Sinewave Controller
Bike specs
Motor: Golden Motor HPM 10kW continuous / 20kWp dual stator PMSM
Controller: EZ-B72800 sinewave, 72V, 800A phase / 400A battery current
Transmission: 2-stage, 6.6:1 gear ratio, ~330Nm torque at the wheel
Battery: 72V lithium pack (planned ~4kWh, 100km range)
Suspension: 790mm adjustable forks + 330mm rear shock w/ progressive linkage
Wheels: 19” front & 18" rear, ~12” ground clearance
Target curb weight: ~190 lbs
Top speed: ~75 km/h
Got a Colour Scheme Idea?
Drop it in the comments — I haven’t locked anything in yet.
Battery build is coming next — I’ve finished the cell testing + balancing rack, just wrapping up the video now.
#anycubic #anycubickobras1maxcombo #s1maxcombo #3dprinting #3dprinter #ElectricDirtBike #3DPrinting #Anycubic #EVBuild #DIYEngineering #CNC #PLA #Prototype #CoreXY #Maker
Instead of messing around with small printers, fiberglass molds, and glued-together puzzle pieces, I’m using the Anycubic Kobra S1 Max with the ACE 2 Pro multi-colour system to print full-scale fairing and fender mockups right here in the shop.
This machine brings a few big advantages for prototyping
Massive 350×350×350mm build volume
CoreXY design for better speed and stability
350°C hotend + heated chamber (65°C) for engineering materials
Multi-colour printing + active filament drying
AI camera monitoring with remote notifications
With that, I’m able to print full-size fairings in one piece so I can test fit everything before committing to molds and save a ton of time, material, and frustration.
I walk through
* Scaling and finishing the CAD models
* Multi-colour slicing workflow (Orca-based slicer)
* Print settings, time comparisons, and tradeoffs
* Printing + assembling the mockups
* Final test fit on the bike
Next step: turning these into vacuum-formed ABS parts for the final build.
Series (Watch From the Start)
Episode 1 – Design + Powertrain Testing
Episode 2 – Chassis Fabrication (DOM Tube + Laser Welding)
Episode 3 – 2-Stage Transmission + CNC Sprockets
Equipment Used
Anycubic Kobra S1 Max & ACE 2 Pro Multi-Colour System
S1MAX Link
Code:3DPRINTING20
#anycubic #anycubickobrasimaxcombo #s1maxcombo
@ANYCUBIC3D
Golden Motor Products Featured
HPM 10kW Dual Stator PMSM Motor
EZ-B72800 Sinewave Controller
Bike specs
Motor: Golden Motor HPM 10kW continuous / 20kWp dual stator PMSM
Controller: EZ-B72800 sinewave, 72V, 800A phase / 400A battery current
Transmission: 2-stage, 6.6:1 gear ratio, ~330Nm torque at the wheel
Battery: 72V lithium pack (planned ~4kWh, 100km range)
Suspension: 790mm adjustable forks + 330mm rear shock w/ progressive linkage
Wheels: 19” front & 18" rear, ~12” ground clearance
Target curb weight: ~190 lbs
Top speed: ~75 km/h
Got a Colour Scheme Idea?
Drop it in the comments — I haven’t locked anything in yet.
Battery build is coming next — I’ve finished the cell testing + balancing rack, just wrapping up the video now.
#anycubic #anycubickobras1maxcombo #s1maxcombo #3dprinting #3dprinter #ElectricDirtBike #3DPrinting #Anycubic #EVBuild #DIYEngineering #CNC #PLA #Prototype #CoreXY #Maker
This website uses cookies
Comments 0
Be the first to comment!