FAST Aerospace is an aerospace startup based in Italy developing advanced propulsion technologies for future space access systems. Its long-term vision is HyperDART, a two-stage-to-orbit spaceplane designed to support independent European access to space for small satellite launches.
Challenge
Developing a liquid-fuel ramjet combustor presented significant engineering and manufacturing challenges. Critical components needed to be able to withstand temperatures exceeding 2,000°C while maintaining structural integrity and precise performance inside the engine.
The flame holder was one of the more demanding parts. It needed to be able to stabilise the flame inside the combustor while incorporating internal cooling channels to protect the component from extreme thermal loads. The required geometry was too complex for conventional manufacturing to deliver efficiently; particularly within the tight development schedule needed for testing.
Solution
The flame holder was manufactured using DMLS in Inconel 718 - a high-performance nickel alloy selected for its temperature resistance. To accommodate the internal cooling channels, the component was produced in two parts and welded together. Protolabs’ engineers worked closely with FAST Aerospace to optimise the design for manufacturability without compromising performance requirements.
Outcome
By working with Protolabs, FAST Aerospace transformed complex propulsion concepts into test-ready hardware, accelerating design refinement and supporting a demanding ramjet combustor test project. The partnership enabled FAST Aerospace to advance its ramjet propulsion technology and progress towards future hypersonic spaceplane development.
Challenge
Developing a liquid-fuel ramjet combustor presented significant engineering and manufacturing challenges. Critical components needed to be able to withstand temperatures exceeding 2,000°C while maintaining structural integrity and precise performance inside the engine.
The flame holder was one of the more demanding parts. It needed to be able to stabilise the flame inside the combustor while incorporating internal cooling channels to protect the component from extreme thermal loads. The required geometry was too complex for conventional manufacturing to deliver efficiently; particularly within the tight development schedule needed for testing.
Solution
The flame holder was manufactured using DMLS in Inconel 718 - a high-performance nickel alloy selected for its temperature resistance. To accommodate the internal cooling channels, the component was produced in two parts and welded together. Protolabs’ engineers worked closely with FAST Aerospace to optimise the design for manufacturability without compromising performance requirements.
Outcome
By working with Protolabs, FAST Aerospace transformed complex propulsion concepts into test-ready hardware, accelerating design refinement and supporting a demanding ramjet combustor test project. The partnership enabled FAST Aerospace to advance its ramjet propulsion technology and progress towards future hypersonic spaceplane development.
This website uses cookies
Comments 0
Be the first to comment!