No Connectors, No Screws - Duality LED Track Low Profile UpgradeMeet Duality V2 - a new low-profile, connector-free track option for my 3D printed WLED system. It sits just 19mm off the wall, is 40% thinner than V1, and needs no connector blocks or screws to assemble.This is an added option in the same bundle, not a replacement for V1. The new track joint design allows for new track connection layout options. If you already own Duality, this V2 update is free. In this video I show the new V2 track design, how the connector-free joints go together, how the screw-free mounting works, how the LED diffuser sits in the thinner profile, and what the finished low-profile wall looks like running WLED effects. Perfect if you want clean, modern LED wall lights with 3D printing and WLED, without buying expensive track hardware.
Links
Duality Download
Duality Playlist
Purchase Components(affiliate links)
Dowels for Entanglement Assembly
M4x30mm (For Track to Track)
M4x25mm(For End Caps and Tunneling)
3Pin Female Headers (for Tunneling)
Recommended controllers for solder-free installation: (Use with WLED_ControllerBase in the models)
Recommended power supplies
For up to 8 meters of strip
For up to 15 meters of strip
Optional Compact Microphone for sound input
Optional Compact Microphone for sound input
LED Strips
LED Strip I used
Flexible LED strip for curves
LED Strip option
LED Strip option
LED Strip option
Hookup wire I used
Hookup wire I used
Economy power supplies I used: and
Barrel jack with pigtails
Wire connectors
Dupont Cables
Strongly Recommended - White filament I used for Diffusers
Strongly Recommended - Bone White filament I used for Diffusers
Grey filaments I use for Track
Optional Strip Connecters I designed for
Optional Strip Connecters I designed for
Recommended Level for Installation
Optional Wall mounting screws I designed for
Drywall screw anchors I designed for
Clear 2-sided tape I used
Wall mounting tape I used
Recommended Plastic Snips
Recommended Plastic Welder for Fixing plastic
Grey Silicone Putty For Cable Management and Light Blocking
Solder I use
Soldering Station I use
Soldering Station Option1
Soldering Station Option2
Soldering Station Option3
0:00 Evolving the Duality LED Track System
1:17 Mastering the Entanglement Assembly
3:27 Curving Strips Around Complex Corners
5:10 Creating Complex Constellation Patterns
11:05 Configuring WLED for Parallel Paths
Links
Duality Download
Duality Playlist
Purchase Components(affiliate links)
Dowels for Entanglement Assembly
M4x30mm (For Track to Track)
M4x25mm(For End Caps and Tunneling)
3Pin Female Headers (for Tunneling)
Recommended controllers for solder-free installation: (Use with WLED_ControllerBase in the models)
Recommended power supplies
For up to 8 meters of strip
For up to 15 meters of strip
Optional Compact Microphone for sound input
Optional Compact Microphone for sound input
LED Strips
LED Strip I used
Flexible LED strip for curves
LED Strip option
LED Strip option
LED Strip option
Hookup wire I used
Hookup wire I used
Economy power supplies I used: and
Barrel jack with pigtails
Wire connectors
Dupont Cables
Strongly Recommended - White filament I used for Diffusers
Strongly Recommended - Bone White filament I used for Diffusers
Grey filaments I use for Track
Optional Strip Connecters I designed for
Optional Strip Connecters I designed for
Recommended Level for Installation
Optional Wall mounting screws I designed for
Drywall screw anchors I designed for
Clear 2-sided tape I used
Wall mounting tape I used
Recommended Plastic Snips
Recommended Plastic Welder for Fixing plastic
Grey Silicone Putty For Cable Management and Light Blocking
Solder I use
Soldering Station I use
Soldering Station Option1
Soldering Station Option2
Soldering Station Option3
0:00 Evolving the Duality LED Track System
1:17 Mastering the Entanglement Assembly
3:27 Curving Strips Around Complex Corners
5:10 Creating Complex Constellation Patterns
11:05 Configuring WLED for Parallel Paths
This website uses cookies
Comments 0
Be the first to comment!