Search Results: "3D Printing"

09:07
SCREW DRIVE RC TANK #3 NEW SCREW DRIVE SYSTEM!

by shubnigg Added 5 years ago 427 Views / 0 Likes

I've design a completely new screw drive system so I can achieve my "goal" if you think you know what it is leave it in the comments! And in this video I showed you only halve of the entire thing due to a few mishaps with some print innovations that I tri
12:30
SCREW DRIVE RC TANK #4 THIS IS GETTING BIG!

by shubnigg Added 5 years ago 445 Views / 0 Likes

This thing is getting big! I've applied some of your suggestions in the comments and finished the second half. I feel confident about this thing going at least straight, not so sure about turning. I hope I can test it next week. Just in case you watched a
12:09
SCREW DRIVE RC TANK #5 FIELD TEST!

by shubnigg Added 5 years ago 463 Views / 0 Likes

Finally I managed to do a field test of this thing. After this I'm not sure if I'll continue with it or what, I'll have to think about it. Please let me know your thoughts and suggestions in the comments. Thanks!!Just in case you watched all my videos and
13:51
SCREW DRIVE RC TANK #6 IT WORKS!!!

by shubnigg Added 5 years ago 372 Views / 0 Likes

Well, it finally works, ya'll told me to never give up and this is the result. I basically increased the tolerances and gave me more space to fasten everything, added a few washers and in the last minute (literally) I had to add to wooden beams for rigidi
14:43
SCREW DRIVE RC TANK #7 Q&A

by shubnigg Added 5 years ago 408 Views / 0 Likes

As promised in the last video here I leave you some of your questions answered, sorry I did not have time to answer all of them and thanks a lot for your support!!If you want to send me something:https://www.ivanmiranda.com/about-1/Joel Telling - The 3D P
12:55
HANDHELD SELF PROPELLING SYSTEM #1

by shubnigg Added 5 years ago 423 Views / 0 Likes

You can find the new T-Shirts and hoodies here:https://www.bonfire.com/this-is-not-a-hammer/All the cool things that Bangood sent me for this project:ZOP Power 22.2V 6200mAh 6S 45C Lipo Battery -- https://goo.gl/RdFXCbEmax AVAN-R 5065 Propeller -- https:/
09:45
THRUST TEST

by shubnigg Added 5 years ago 418 Views / 0 Likes

An attempt at a thrust test this week with controversial results...You can find the new T-Shirts and hoodies here:https://www.bonfire.com/this-is-not-a-hammer/All the cool things that Bangood sent me for this project:ZOP Power 22.2V 6200mAh 6S 45C Lipo Ba
12:06
DIY BIG CLOCK - USB POWERED NIST SERVER TIME KEEPING

by shubnigg Added 5 years ago 395 Views / 0 Likes

This week needed more time, so I made a clock! This one has a modular design and has been made so it can be printed on almost any printer. All the files and info necessary to make one for yourself can be found here:https://www.ivanmiranda.com/diy-big-digi
07:32
TANK TRACKS - 3D PRINTED TANK #1

by shubnigg Added 5 years ago 497 Views / 0 Likes

I've finally started the tracked vehicle project! This week I had to be out in a trip for two days so not much time to work on the video but I'm already printing a massive amount of parts for next week video. I'm planning (not pretending as I say on the v
16:46
HALF TANK - 3D PRINTED TANK #2

by shubnigg Added 5 years ago 469 Views / 0 Likes

This tank is starting to take shape, half of the shape precisely. As the chassis is printed in two halves I've used half of the tank to test all the design features and I'm really surprised of how well it worked. I'm trying a slightly different way of mak
18:33
SUSPENSION! - 3D PRINTED TANK #3

by shubnigg Added 5 years ago 477 Views / 0 Likes

Per popular request I had to put suspension on the tank, and it looks awesome!! I had to figure out a suspension mechanism for the lower rollers and a tensioning system for the back idler. It has been a great week full of improvements but all the advances
20:09
GLOW IN THE DARK 3D PRINTED GLOBE

by shubnigg Added 5 years ago 360 Views / 0 Likes

This week I made a Glow in the Dark 3D printed Programmable Globe. To test it I programmed in it the earths surface but anything could be show... your face... the time... Super cool! I hope you like it!And I used this project as a time buffer while the pr
22:46
CHASSIS COMPLETE - 3D PRINTED TANK #4

by shubnigg Added 5 years ago 453 Views / 0 Likes

This week finally finished a complete chassis which took my entire stock of filament/time/family-points but at least this thing is taking shape. After a whole lot of parts printed we have a complete chassis with suspension and two extremely powerful motor
15:19
BIGGER!! - 3D PRINTED TANK #5

by shubnigg Added 5 years ago 435 Views / 0 Likes

This week I completed the final version of the chassis and tested one of the treads with one of the motors. This thing is going to fly!! I know that the first half of the video is slightly out of focus but let's consider that the least troublesome issue..
13:41 Popular
IT MOVES!! - 3D PRINTED TANK #6

by shubnigg Added 5 years ago 518 Views / 0 Likes

This week I managed to make a quick test of the tank so I can keep improving it. Progressss!!!!It seems that I accidentally deleted the clip where I thank all my Patreon supporters and it is too late to go and record it again. Thanks to you all!!!All the
18:38
NARROWER & STRONGER - 3D PRINTED TANK #7

by shubnigg Added 5 years ago 369 Views / 0 Likes

After a zillion comments telling me this thing is too wide, I reduced its width by 100mm and as I was doing that I decided to reinforce the supports for the suspension and a whole lot of other improvements that will add to the greatness of the finished pr