http://www.keenracking.com/warehouse-rack/push-back-rack/ 1. The pallet car is composed of typical structural parts, such as pallet car. The pallet car has flow characteristics. The goods are regulated to enter and exit at one end of the rack, and follow the order of first in and last out.
2. During the storage and transportation of goods, the forklift is only located at the lower end of the rack channel, without entering the rack storage channel. This kind of rack has the typical characteristics of high storage density and fast storage and transportation speed.
3. It is usually used in places where the storage space is extremely limited, but the storage capacity must be increased or there is a time requirement for goods, etc. which does not require high requirements for goods picking.
Working principle
When the first pallet is picked up, the next pallet slides to the pick-up point by itself, which can effectively use a single channel for access, especially for the storage management of the cargo transfer area. Compared with ordinary shelves, press in shelves can increase the utilization rate of the ground by about 60%. The safety and operation efficiency of the press in type rack are higher than that of the drive in type rack. It only needs to be equipped with a forward moving forklift or a counterweight forklift to use, and the operation requirements of the forklift are lower than that of the drive in type rack. It is suitable for the operation mode of small variety and large batch of goods, first in and last out. It is suitable for the situation that the utilization of space needs to be greatly improved, such as freezer.
Information About Push-back Racking:
If you want Push-back Racking we need this information锛?/p>
1) The Auto CAD drawing.
2) The size of your warehouse
3) The height, width, depth of frame.
4) The length, height of beam.
5) How many bays you want?
6) How many layers you want?
7) The loading capacity of each pair beam.
8) How many pallet per layer?
9) The size of each pallet.
10) The loading capacity of each pallet.
11) The RAL color you want.
12) The destination port.Customized Push Back Rack
website:http://www.keenracking.com/warehouse-rack/push-back-rack/
Loading...
