3D Print your own mini battlebot! (FULL tutorial FREE .stl download)

Learn how to design, print and build your very own combat robot (battlebot)!

In this detailed tutorial you'll learn how to create an antweight (150g) controlled fighting machine using low cost parts and a 3D Printer!

You can use this tutorial to create almost any remote controlled robot platform of any size. If you create something, please let me know!!!

.STL and .STEP downloads - https://www.makersmuse.com/3d-printed-antweight-v1

Learning Resources:
Robowars Adelaide event - https://www.sciencealive.net.au/
Lipo battery disposal - https://hobbyking.com/en_us/blog/lipo-battery-disposal-for-beginners/
LED resistor calculator - https://www.allaboutcircuits.com/tools/led-resistor-calculator/

Part Resources (FEEL FREE TO USE YOUR OWN - MAY BECOME UNAVAILABLE)
Gearmotors - https://www.ebay.com.au/itm/192569276688
Battery - https://hobbyking.com/en_us/turnigy-nano-tech-300mah-2s-35-70c-lipo-pack.html
Flipsky dual ESC (DOES NOT HAVE MOTOR BRAKE) - https://flipsky.net/collections/electronic-products/products/brushed-esc-dual-way-speed-controller-2s-3s-5ax2-esc-speed-control-for-rc-vehicle-car-boat-tank-airplane-fixed-wing-drone

More to come.

Timestamps:
0:00 Introduction into combat robotics
1:48 Are they really robots?
2:13 Rules
3:24 Introduction to antweights
4:10 Parts you will need
4:44 Drive motors
6:46 ESC's
7:53 Batteries
10:06 Transmitter and receiver
11:22 Channel mixing
12:07 What else do you need?
12:44 Design process
16:08 3D Printing with Prusaslicer 2.5.0 a2
17:35 Wiring diagram
20:37 Do you need a BEC?
21:44 Wiring and assembly
24:20 Finished!


Support Maker's Muse on Patreon
https://www.patreon.com/makersmuse?ty=h

3D Printing Quick Start Guide - https://www.makersmuse.com/fdm-fff-3d-printing-quick-start-guide

3D Printer Buyers Guide - https://www.makersmuse.com/purchasing-your-first-3d-printer-fdm-fff

3D Printing Essentials - https://www.amazon.com/shop/makersmuse