Fusion 360 Tutorial - Jet Engine Bracket (remodelling a bad part)

In this Fusion 360 tutorial, you’ll learn how to design a jet engine bracket for CNC machining. We’ll go over a badly designed bracket, explain why that design would be hard to machine, and finally remodel the entire bracket from start to finish in Fusion 360.


00:00 Introduction to the Fusion 360 tutorial

00:19 Here we’ll show a badly designed bracket and mention design aspects that are often used but make CNC machining very difficult and costly.

00:48 We’ll look at the bracket design in Fusion 360 and discuss why thin walls are problematic.

01:29 Next, we’ll talk about sharp corners and why these need to be avoided in your Fusion 360 design.

02:00 Correct modelling of the jet engine bracket paying special attention to avoiding thin walls and sharp corners.


Use our platform to get an instant free quote on your design: http://3dhu.bs/GNmWJC


Hubs is an online manufacturing platform that provides engineers with on-demand access to a global network of manufacturing partners. Users can easily upload their design, instantly receive a quote, and start production at the click of a button.


Facebook: http://3dhu.bs/R-OXDm
Instagram: http://3dhu.bs/7EZ5mG
Twitter: http://3dhu.bs/oRC1uy
LinkedIn: http://3dhu.bs/t2KEyM